Dew Point Transmitter is designed to measure the performance of drying systems for air,nitrogen,Hydrogen,SF6,NH3 etc…and other compresses gases.This Model is ideal for monitoring medical,commercial and industrial applications including plastics resin dryers,breathing air,pneumatic tools,instrument air,and spraying/coating applications.
It measures dew point by utilizing microprocessor circuitry to convert sensor signal by the use of psychometric equations.
TECHNICAL SPECIFICATIONS
Sensor:Aluminium Oxide
Media to be measured:gas,air(Hydrogen,SF6,N2,Etc…)
Dew Point Range : -110 to +30 Deg C
Accuracy : +/- 2 Deg C or better
supply: 230 VAC,50 HZ
Analog Output: 4-20mA
Display: 4.3″ Touch Display
Alarm relays : two alarm contacts
Pressure Compensation:flow meter provided to ensure the require flow to the sensor
Process Connection: 1/4 inch NPT in flow chamber,customize also available
Sensor to transmitter cable: 20 mtrs length cable
Operating Pressure limit: 70 Deg C Max
Enclosure : IP 65 with suitable cable glanding
Calibration: Standard Calibration Certificate should be provided
Digital Output : RS 485
SPECIAL FEATURES
Analog Output 4-20 mA for dew point
Condensation Insensitive
Fast Adjustment time
Pressure resistant up to 350 bar
RS485 RTU interface from Control Unit
Higher resolution of the sensor signal history graphical data
Sensor diagnosis on site with mobile device