Portable Bio Gas Analyzer

Vasthi Portable Bio Gas Analyzers is a light weight, easy to handle,battery-powered analyzer, used to verify measurements and for spot checking when other methods provide questionable results.

portable-biogas-analyzer

CATALOG

Portable gas analyzers are microprocessor–controlled instrument with sophisticated software process that meets the needs of industry in analyzing the Gases with accuracy and reliability. Portable Bio Gas Analyzers NDIR transducer provides highly stable and reliable results. We are supplying gas analyzers in India wise.

Key Features

NDIR absorption principle

The large LCD screen with clear display assures simple operation.

Single-beam infrared gas analyzer having excellent stability is adopted.

The O2 sensor is available in 2 types:

Paramagnetic type and
Electro Chemical type.

Automatic in operation

Micro controller technology

Customer specific configurable

Suitable for Single or Multiple GAS Analysis

Long battery backup hours

Alarm indicators-low, high and fault Self diagnosis

Easy calibration in fresh air

Run-while charging capability

Virtually maintenance free

No interference from glycol, methanol or amine contaminants(vapor phase)

Fast and accurate real time measurements

Optional RS 232 and Computer Interface to transfer the shareddata

Data logger to store the data in system,Internet facility to monitor 24 hours

TECHNICAL SPECIFICATIONS

Measured component/  measurement  range

CO2      :    0-  200 ppm or 0-100%

CO       :   0-  200 ppm or  0-100%

NO       :  0-2000  ppm or  0-100%

H2S      :   0-5000 ppm or 0-100%

CH4      :  0-2000 ppm or 0-100%

Propane   :  0-500  ppm or 0-100%

O2 Electrochemical  :  0-10  ppm or 0- 25%

O2 Paramagnetic     : 1  %  0-100%

Application  Data

Environmental  Temperature  Range    :   -20° to  50° C  (-4° to  122° F)

Sample  Inlet Pressure :10  to  25  PSIA,  10 PSIG maximum

Sample Flow  Rate   : 0.1-10  L/min  (0.2  to 20  scfh)

Electrical  & Communications

Input Voltage : 100-240 VAC,  50-60 HZ  standard

Electrical Storage :12-Volt,  Sealed Lead-Acid Battery Approx.  8 hours usage time per charge

Current :0.5 A  @ 120 VAC during  recharging

Outputs : RS232  – all  parameters

LCD Display :Concentration

Alarms: Two Levels  (selectable  range)

Accuracy :+2%

Repeatability:+0.5%

Signal response time:t 90  <2sec.  (At 1  LPM) 90

Operating  Temperature : 0  –  50 Deg.  C

Warm  up Time :‹3  min