Retrofit emission control device for dg set

Veritcal View
VE-REF 7100 for PM
VE-REF 7200 for PM, CO, HC
VE-REF 7300 for PM, CO, HC &Nox
Technology Regeneration Ceramic Filter
DG Set Capacity 125 KVA
Regeneration Time 10 Mints
Material Construction SS304
Temperature Indication
Pressure Indication
PM Capture/PM reduction capacity 95.5%
High Heat Resistance
Low exhaust Resistance
Easy to Install
Maintenance twice a yearly with back Purge

Retrofit emission control device for dg set


Retrofit for emission control Diesel Generator emission particulate purification device also known as Retrofit Emission control device or (RECD) in short form is recognized worldwide as the most effective method and equipment for reducing diesel particulate matter and other emission gases. It first captures the concentrations of PM in the exhaust of the diesel engine and uses catalysts, oxidizers, combustion technology to decompose and burn them to remove most of the particles, thereby reducing particle emission. We use alkaline metals, which can fully capture the oxygen atoms in the air for the oxidation reaction. The common regeneration time generally takes about 20 minutes, but Vasthi advanced technology can completely regenerate in just ten minutes. 


The RECD device uses the porous partition walls between the alternately blocked honeycomb channels to capture the PM black smoke micro-particles in the exhaust gas of the diesel engine. The black smoke containing carbon particles emitted during the operation of the diesel engine enters the engine exhaust RECD through a special pipeline and passes through the densely arranged filters inside the engine to adsorb the soot particles on the ceramic filter. Diesel engine exhaust particle trap adopts particulate filter ceramic carrier. The filter-type ceramic body is composed of many small parallel pores; these parallel pores are separated by air-permeable pore walls. One end is open and the other end is blocked. The micropores can allow exhaust gas molecules emitted during the running of the diesel engine to pass. The black smoke particles cannot pass through the micropores due to their relatively large size and are filtered on the surface of the ceramic pore wall, thereby achieving the effect of eliminating black smoke. After running the diesel engine for a period of time, the intercepted carbon particles need to be cleaned up regularly. 
 

About Retrofit Emission Control Device Introduction:

Large diesel generators are an important part of the infrastructure in many countries. However, they also produce a significant amount of emissions, which can be harmful to the environment. A retrofit emission control device is the most effective way to reduce these emissions and protect the environment.

1. What is a retrofit emission control device?

A retrofit emission control device, or RECD, is a piece of equipment that is installed onto a diesel generator to reduce emissions. The RECD is recognized worldwide as the most effective method for reducing diesel particulate matter and other emission gasses. While the RECD does come with an initial cost, it is a much more affordable option than replacing your diesel generator altogether. Additionally, the RECD can be installed relatively quickly and easily, so you can start enjoying the benefits right away.

2. Why do you need a retrofit emission control device for your diesel generator?

You need a retrofit emission control device for your diesel generator to reduce emissions of diesel particulate matter, nitrogen oxides (NOx), and sulfur dioxide (SO2). Diesel particulate matter is recognized worldwide as a leading cause of cancer and respiratory illness. Nitrogen oxides and sulfur dioxide are major contributors to acid rain, which can damage forests, lakes, and buildings. Reducing emissions from diesel generators is important for public health and the environment. A retrofit emission control device is the most effective way to reduce emissions from diesel generators.

3. How does a retrofit emission control device work?

A RECD is an emissions control device that is installed on existing diesel generators to reduce emissions of particulate matter and other gasses. It works by capturing the emissions from the engine and using catalysts, oxidizers, and combustion technology to decompose and burn the particles, removing most of them from the exhaust. RECDs use alkaline metals which can capture the oxygen atoms in the air for the oxidation reaction.

4. What are the benefits of using a retrofit emission control device?

There are many benefits to using a retrofit emission control device on your diesel generator. Some of the most important benefits include:

- Reduction in diesel particulate matter (DPM)

- Reduction in other gasses, such as carbon monoxide (CO) and nitrogen oxides (NOx)

- Increased efficiency and fuel economy

- Reduced emissions, which leads to a reduction in environmental impact

5. How to choose the right retrofit emission control device for your diesel generator

When selecting a RECD for your diesel generator, it's important to choose the right one for your needs. There are a variety of devices on the market, so it's important to find one that fits your engine and your emissions profile. Make sure to consider the type of fuel you're using, the size and age of your generator, and any special requirements or regulations in your area. Talk to a knowledgeable sales representative to find the right RECD for your diesel generator and start reducing emissions today!

Conclusion:

A retrofit emission control device is a vital piece of equipment for any diesel generator. It helps to reduce emissions and improve air quality, making it an important investment for any business or organization.

  • Retrofitted emission control equipment for DG set
  • Retrofit emission control device
  • Emission control device for dg set
  • Emission control device 
  • Retrofit for dg set

FEATURES :

FEATURES :
RETROFIT DEVICE FOR DG SET 

easy to install. No mechanical modification is required I Digital Pressure indication 
Temperature indication I Easy to clean 
Very low maintenance I Material construction with SS304 I Online monitoring of Inlet and outlet temperatures 
No moving parts 

 

Related Products

Get in Touch

Have a question about our Device? Don’t hesitate to contact us directly using the form on this page or by visiting our office.

Contacts:

Ph. +91 7337418685
Mail. info@vasthi.com
Office. HYDERABAD

Manjeera Trinity Corporate,
Plot No-112, Survey No:1050,
JNTU, Hitech city Rd, KPHB Colony
Kukatpally, Hyderabad-500072


© 2021  Vasthi Instruments. All rights reserved